Summary of the main problems of the plane mask machine:
1. Loose wires when installing the nose bridge wire
2. Clogged nose line
3. Wrinkles appear on the bridge of the nose
4. The gantry of the mask cloth feeding is uneven
5. Mask wrinkles
6. After the mask is pressed, the pressure wheel passes and the mask is deformed
7. Mask piece cannot be completely cut off
8. The final pressure wheel adjustment of the main body machine
9. Abnormal feed of ear belt machine-feed rail width adjustment
10. Abnormal feeding of ear belt machine-sensor adjustment
11, ear strap hanging line problem-push the jaws not in place
12. Adjust the far point position of the ear wire machine chain
13. Track width and ultrasonic rigid mold position adjustment
14. Indenter position adjustment
15. Ear wire welding quality adjustment
16, ear line rack rotation zero position adjustment
17. Adjusting the clamp opening position of the ear clamp jaw
18. Position adjustment of ear wire scissors
19. Abnormal feed track of ear belt machine-width adjustment of feed track
20. The feeding track of the ear belt machine is abnormal-the feeding sensor is adjusted
21. Ear strap hanging line problem-push the gripper not in place
22. Ear strap hanging line problem-insufficient welding time
23, ear strap hanging line problem-ear line clamp position is high
24. The ear wire is cut continuously-the ear wire is not on the turntable
25. The ear wire is cut continuously-the ear wire is not clamped by the jaws
26, ear line shears constantly-scissors edge adjustment
27. Poor welding of ear straps-insufficient cylinder pressure
28. How to wear cloth
29. Mask wave wheel adjustment
30. Installation and adjustment of mask folding mechanism
31. Adjustment of nose bridge wire feeding and cutting mechanism
32, mask width adjustment
33, the main body embossing shear wheel adjustment
34, cheap adjustment of the main machine center
35. The gantry of the mask cloth feeding is uneven
36. The mask sticks after the welding roller