Palletizers are one of the indispensable packaging machinery in current assembly line production. Its main function is to better palletize products, ensure normal packaging and handling, thereby reducing labor costs. The compressive strength is high, the stability is good, and the calculation is more accurate and reasonable.
The stacking strength and compressive strength of corrugated boxes are the two main basis for the design of corrugated boxes. Traffic conditions are becoming more modern, mechanized, and integrated. The stacking method, stacking layer, pallet placement position and other operation methods have an important influence on the stacking strength. The stacking method is to stack the goods on pallets. There is no overlap at all.
The cargo is easy to split vertically, and the stability of the high-position palletizer is poor. However, from the perspective of improving the efficiency of the tray and giving full play to the compressive strength of the box, this is a good stacking method.
Positive and negative movement: This method is the same as bricklaying, with good overlap between layers and high cargo stability. This method is mostly used for rectangular pallets.
Crosscut: This is the odd and even layers stacked on pallets in different directions. This method can only be applied to square pallets. The operation is relatively simple, and there is overlap between layers. Especially when using autoencoders, this is a good method.
Rotational interlacing: This method changes the direction by 90 degrees to form an overlap in each stacked layer to ensure stability. Since holes are easily formed in the middle of the automatic stacker, the surface utilization rate of the stacker is reduced.
Stacking strength and stacking load Stacking strength refers to the load that the stored corrugated boxes can withstand before they collapse when corrugated boxes are stacked under static pressure. It can be tested through experiments, and the compressive strength can be estimated through testing. The stacking strength load refers to the load of low cartons, or the stacking strength of low cartons. The lower box is intensively compressed during flat stacking, and the lower box is eccentrically compressed during staggered and cantilever stacking. Approximately calculate the larger stresses of staggered and cantilevered stacked bottom boxes using rectangular section, hinged ends and pressure bars of eccentric pressure devices.
Therefore, the compressive strength of stacked cartons, the pallet stacker manufacturer, reduced the compressive strength of rotating and staggered cartons to 45 on the 15th, and the compressive strength and longitudinal staggered stack of cartons by 55. Therefore, overlapping stacking is a good stacking method that improves the efficiency of pallets and can exert the compressive strength of the box.