With the rapid development, the stacker is the most commonly used warehouse equipment in the automated warehouse. When the stacker breaks down and is abnormal in operation, how to deal with and solve the abnormal through WCS warehouse scheduling system.
Stacker – out of tolerance alarm
In the automated warehouse, the manual handling of the stacking machine out of tolerance fault, emergency stop, enter the roadway to move the goods to the right or use the forward and reverse function of the conveyor line to put the goods in the right position, and then click Reset in the WCS stacker control to start again (when the signal is sent, the click interval is 1s).Or in the ground operation side, see the stacker operation manual for details.
There is no cargo at the time of pick-up and no cargo at the time of delivery
Determine the cause of the error, solve the error in each step, reset the stacker first, delete the task, and then re issue the task.
Stacker inverter fault
See the operation manual of stacker for details.After processing, use software reset to restart or ground operation reset to restart.
WCS system task not issued
If the conveyor task is not distributed, judge the fault on site (with or without goods: no goods delivery), and re distribute it according to the re distribution steps in the sub task execution list.
If the task of the stacker is not distributed, check whether the condition value of the task list is true. If yes, it will be re distributed. If not, check whether the status value of the stacker matches the condition. Modify the status value of the stacker and re distribute it.
???? The above is the handling of problems encountered in the stacker technology, and other problems about the stacker price can also consult us jujumi, looking forward to cooperating with you.