It is very important to know about the daily maintenance of the stacker. After the installation and commissioning of the equipment, we must adhere to the daily maintenance and establish the daily inspection.Monthly inspection and annual maintenance system.Then the main inspection contents of daily maintenance of the stacker include the following items:
1. Whether the column and upper and lower beams are deformed or twisted.
2. The deflection and deformation of the fork, the wear of the guide surface and the guide wheel.
3. Whether all kinds of welding components and castings are cracked or corroded.
4. Check whether the bolts, rivets and positioning tools are loose.
5. Whether the sprocket, pulley, gear and drum have cracks and excessive wear, and the wear of brake parts.
6. Check whether the lifting wire rope is damaged.
7. Whether the lifting track is deformed, twisted or loose.
8. Overload, loose rope safety device and broken rope safety device are damaged
9. Whether the road surface of the wheel is worn.
10. Check whether the rolling bearings are damaged.
11. Check whether the cable trolley, cable, power supply sliding contact line and collector are damaged.
12. Whether the overspeed protection device is reliable.
13. Check whether the rolling bearings are damaged.
14. Whether the electrical box, cabinet, photoelectric switch, travel switch, junction box, cable laying and installation are firm, whether the protection is good, whether the action is normal, and whether the sealing ring and gasket are aging and damaged.
15. At the same time, the lubricating oil must be replenished and replaced on time, and the lubricating device must be kept clean and tidy.
The above is about the “basic components of the stacker” all the answers, I hope to help you.