What are the warehousing process and precautions of the stacker? Then the main purpose of the stacker is to run in the channel of the automated three-dimensional warehouse, store the goods at the gateway into the cargo compartment, or take out the goods in the cargo compartment and transport them to the gateway.The following describes the specific steps of stacker Warehousing:
The first step is to start up the stacker and operate normally when the stacker is in continuous strike state. Before each operation, the stacker will check by itself, and the stacker will end automatically. Check whether all positions and the four photoelectric switches on the loading table are on. If there is no abnormality, it will enter the “standby” state, which means that the stacker can work online with the upper computer after passing the self check. The upper computer will issue the online command, and the networking light of the stacker will be onIf it is on, it indicates that the interconnection is successful, and the stacker is controlled by the upper computer.
In the second step, after the upper computer sends the storage operation address, the stacker begins to put things.When the cargo unit is put into storage, it is transported to the storage platform by the conveying system. The goods are scanned and read by the bar code identification system. The information carried by the bar code label is read in and transmitted to the central server. The control system determines whether to put into storage and the location coordinates according to the information returned by the central server. When the goods can be put into storage, it sends the warehousing instruction including the location coordinates to the execution system,The stacker can store the goods to the designated bin by automatic addressing.After finishing the warehousing operation, the stacker returns the operation completion information to the control system and waits for the next operation order.
After finishing the third step, the stacker returns to the central control system for information storage.
To sum up the above aspects, the following matters must be paid attention to when the stacker is placing objects:
1. When the stacker is in the network state, people can’t walk in the roadway. If they have to walk in the roadway under special circumstances, they must walk on the left side. In case of outburst, they can use their body or other objects to block the operation and stop the stacker.
2. When the stacker is working, it is not allowed to stand under the position of picking up or discharging goods, so as to prevent accidents when the machine pushes out the goods.
3. Only under special circumstances such as maintenance, can the stacker reach the starting state, otherwise it is not allowed to keep the machine online for a long time.