Design of automatic fruit cartoning machine

In recent years, with the popularization of online shopping and the improvement of people’s living standards, more and more people are buying fresh small fruits on online platforms, and the market demand is large. After the online transaction, the seller must reasonably pack the small fruits by express delivery, and avoid damage on the road. Therefore, it is necessary to carry out proper shock-proof, collision-proof and fresh-keeping packaging for small fruits. However, the packaging used to express small fruits has complex forms, numerous packaging materials, and complicated packaging steps, which is not conducive to the smooth packaging of large quantities of online shop personnel. However, there is no automatic equipment for small fruit packaging in China. If a large number of small fruits are packed manually, a large number of workers must be hired, resulting in excessively high labor costs for the online store.

Technical realization factors:

In order to overcome the shortcomings of high labor cost, high labor intensity, and low work efficiency in the existing fruit packaging methods, this utility model provides a small fruit cartoning machine with low labor cost, low labor intensity and high work efficiency The linked temporary storage mechanism can effectively prevent the small fruits on the slope from rolling off during the packaging process and ensure the accuracy of the quantity of feed.

The technical scheme adopted by the utility model to solve its technical problems is:

a linkage temporary storage mechanism of a small fruit cartoning machine, including a frame, a push block, a sliding block, an optical shaft, a joint bearing, a connecting rod, and a horizontal bearing seat , A support rod, a swing shaft and a feeding inclined surface, the push block is movably installed on the frame, the push block is matched with the slider, and the slider is movably sleeved on the optical axis, A compression spring is sleeved on the optical axis, a joint bearing is installed on the slider, the joint bearing is connected to the lower end of the connecting rod, and the upper end of the connecting rod is connected to the upper end of the support rod through a horizontal bearing seat. The lower end of the rod is linked with the swing shaft, and a feeding inclined surface is fixedly installed on the swing shaft.

   

Leave a Reply