What should be paid attention to before starting the AGV? First of all, make sure that the position of the AGV is placed correctly, push the AGV to the middle of the guide wire, and then turn on the power.When starting the power supply, if the welcome interface is displayed on the front display screen, it will start normally. If you only hear the long warning tone and do not start normally, you have to turn the key back to the original position to restart.
If the AGV is not started successfully for many times, it may be that the power of the AGV car is exhausted and the car should be charged as soon as possible.The normal start of the car will carry out self inspection, automatically adjust the front and rear of the car, adjust the position properly, and prepare for the next operation.At this time, the operator can carry out the next operation.
If AGV car runs abnormally, it needs to stop in emergency, turn off the power and restart after adjustment.For example, the trolley derailment often occurs, because the trolley provides derailment protection circuit inside. When the trolley leaves the track and runs for 2 seconds, it will automatically stop running. At this time, it is necessary to turn off the trolley power and push the trolley back to the track.
When the site is limited and the running route is complex, try to slow down the car to gear 1 or 2. When turning, before parking and starting from the parking state, please ensure that the speed is gear 1. When running in a straight line, you can choose gear 2.AGV car speed is too fast, the situation can not be controlled in time, may cause damage.
After the AGV car works, it should be charged in time.When the indicator light on the top of the car is green, it indicates that charging is normal.When the ammeter pointer on the charger reads, when the pointer reading is less than 1a, it means that the charging process is near the end. At this time, the charger can be removed.If you need AGV car, please contact jujumi.