Nowadays, more and more AGV handling robots are applied to the field of industrial manufacturing, which brings new production mode and development direction for traditional manufacturing enterprises.Now the demand for AGV cars and other industrial robots is growing, robots will replace workers will become an inevitable trend.Of course, as an important automation equipment in modern manufacturing industry, AGV needs a specific application site and environment to operate normally.What are the environmental requirements of AGV?
1. The best ground material for AGV is hard cement ground or conductive plastic ground.
2. For the normal operation and work efficiency of AGV, the temperature range of the workshop is – 10 ℃ ~ 50 ℃, and the relative humidity is ≤ 80%.
3. Never use AGV under the following conditions:
? in an explosive environment or in an acidic or alkaline environment;
In the place where the floor does not have enough bearing capacity;
In case of AGV failure;
4. Less dust and iron powder.Try to avoid water (rain or water drops), oil (oil drops) and other liquids; without direct sunlight, the body temperature of AGV will be higher under efficient operation, and if there is always direct sunlight, the service life of AGV will be affected.
5. When driving on the slope, pay special attention to be careful when driving on the slope.The AGV has a small ground distance, usually 20-50 mm (up to 50 mm).General types of AGVs are not suitable for driving on slopes.
AGV, as a commodity with high level of automation technology in freight logistics weapon equipment, is more and more used in several manufacturing industries, such as storage logistics, manufacturing, diagnosis and treatment.